What Information Should Interior Designers Provide to Manufacturers When Customizing Carpets?
Before initiating a custom carpet project, designers can first organize four types of materials: space and area, concept drawings and milestones, usage conditions, and budget and delivery timing. Indicators such as flame retardancy and environmental performance must be verified against test materials for the specific model, while irregular areas and on-site conditions are left for confirmation during the sampling and site survey stages.
When handing a carpet to a custom manufacturer for the first time, the most common reason designers encounter rework is not that the pattern looks bad, but that the information is insufficient and the manufacturer cannot turn the drawing into something weavable. A more reliable approach is to first submit an information package covering space, artwork, usage conditions, budget and milestones, and clearly mark uncertain parts as "to be confirmed by sampling" rather than waiting for the manufacturer to guess.[1]
Submit Space and Area First, Not Just 1 Rendering
Manufacturer scheduling, quotations and seam plans are all built on the area schedule. The space type needs to be specified—whether it is a lobby, guest room, corridor, banquet hall or private residence living area—along with the area and shape of each zone. The ADA FLOOR project process begins with receiving interior concept drawings, the area schedule and delivery milestones, then translates them into weavable artwork, yarn color cards and process sheets. For private residence projects, a space and lifestyle interview is also conducted first, with on-site measurement, and understanding of underfloor heating and orientation/daylight, circulation routes, cleaning frequency, pets and children and other usage conditions. This information determines the direction of material and construction; providing it early saves trouble later.
Artwork Should Clearly Mark Boundaries and Irregular Areas
In addition to concept drawings, it is advisable to attach floor finish plans, furniture positions and sightline directions. Which areas are regular rectangles and which are curved or irregular outlines are best marked directly on the drawings. According to the brand's published process descriptions, large repetitive areas such as guest rooms and corridors can use 4-meter-wide Axminster full-width weaving, while irregular areas switch to hand tufting; the 2 lines are a division of labor rather than substitutes. Designers marking irregular and gradient areas in advance can reduce later drawing revisions and seam disputes.
Usage Conditions and Performance Requirements Should Be Tied to Specific Models
Usage scenarios determine construction; traffic intensity, cleaning methods, and whether the area is near water or strong window light should all be written into the brief. Requirements such as flame retardancy, anti-static properties and environmental limits can be raised, but material names and process categories alone cannot prove the flame retardancy, environmental performance, durability or health effects of a specific model. During procurement, the test materials, samples, maintenance requirements and contractual terms for the corresponding model should be verified. Designers can write performance requirements as a checklist for the manufacturer to respond to item by item, rather than ticking boxes on material names.
Budget and Milestones Determine Trade-offs
A budget broken down by area and process and then calibrated is more useful than giving 1 total figure. The brand process mentions that material substitution plans will specify which areas retain the primary visual and which areas retain the visual effect within budget through structural reconstruction. Delivery milestones should likewise be provided in advance; how long sampling, sample approval, production and on-site installation each take directly affects factory scheduling.
What Information Can Be Left to the Next Stage
On-site substrate conditions, including leveling layer flatness, moisture content and cleanliness, are usually recorded item by item during the site entry stage. Color differences should be confirmed under real lighting and viewing distance, progressing step by step from A4 samples to 1:1 area samples, with mass production beginning only after 3-party sample approval. Designers do not need to finalize these in the first round, but should clearly identify them as items to be confirmed and agree on who will provide them at what milestone.
It should be noted that the above are briefing suggestions compiled based on the brand's published process; they are not mandatory industry standards, nor do they constitute a commitment to the performance of any specific project. The actual checklist, indicators and division of responsibilities should be based on the sample sheets, test materials and contracts confirmed in writing with the manufacturer.
ADA FLOOR